Flex Shaft Head Data

Flex Shaft Head Performance Data

Model Head DiameterHead LengthHead WeightDiameter of Effect*Vibrations per
Minute
Centrifugal
Force
1/2 Wave
Amplitude
D.81-6
13/16"6"1 lbs3" to 7"12,00061 lbs0.024"
D.8113/16"11"1 lbs5" to 11"
12,000141 lbs0.03"
D1.251.25"8"2 lbs10" to 15"12,000178 lbs0.035"
D1.51.5"13"5 lbs12" to 18"10,000435 lbs0.045"
D1.751.75"15"7 lbs14" to 21"10,000830 lbs0.05"
D2.02.0"10"6 lbs16" to 24"10,000900 lbs0.055"
D2.52.5"10"9 lbs20" to 30"10,0001,260 lbs0.055"
D2.75 Spud2.75"6"7 lbs14" to 21"12,000818 lbs0.035"
D3.03.0"12"15 lbs24" to 36"10,0001,676 lbs0.039"

*The diameter of effect varies with wetness of the pour. The lower number is based upon a 2 to 4 inch slump.

High Cycle Head Data

High-Cycle Vibrator Performance Data

Model Head DiameterHead LengthHead WeightDiameter of Effect*Vibrations per
Minute
Centrifugal
Force
1/2 Wave
Amplitude
HC134
1.75"20"11 lbs14" to 21"10,800810 lbs0.045"
HC2002.0"20"13 lbs16" to 24"
10,800888 lbs0.05"
HC2502.5"21"20 lbs20" to 30"10,8001,690 lbs0.053"
HC3003.0"21"23 lbs24" to 42"10,8001,950 lbs0.051"

*The diameter of effect varies with wetness of the pour. The lower number is based upon a 2 to 4 inch slump.

Pneumatic Vibrator Head Data

Pneumatic Vibrator Performance Data

Model Head DiameterHead LengthHead WeightDiameter of Effect*Vibrations per
Minute
Centrifugal
Force
1/2 Wave
Amplitude
Air Use at
90 PSI
A250
2.5"10"8 lbs20" to 30"10,000736 lbs0.04"60 cfm
A3003.0"13"15 lbs24" to 36"
9,0001,294 lbs0.06"110 cfm
A3503.5"13"20 lbs29" to 42"9,0001,830 lbs0.045"115 cfm
A4504.75"17"39 lbs38" to 54"8,0002,454 lbs0.04"175 cfm
A600S6.2"19"60 lbs50" to 72"7,0003,380 lbs0.045"190 cfm

*The diameter of effect varies with wetness of the pour. The lower number is based upon a 2 to 4 inch slump.

RG60 Head Data

RG60 Performance Data

Head Diameter:Head Length:Head WeightVibrations per MinuteCentrifugal Force1/2 Wave No Load
Amplitude
Diameter of Effect*
2.75"15.25"14 lbs10,000576 lbs0.026"12" to 20"

*The diameter of effect is based upon a 5 to 7 inch slump.   Please note that the RG60 is not suitable for slumps stiffer than 5 inches or with aggregate larger than 3/4 inches.